Diesel Place banner

Eaton E-locker questions

697 views 2 replies 3 participants last post by  66flh 
#1 ·
I am looking at a buyin the e-locker from eaton and i was wondering how hard it is to install on my own and how long it will take. I know it has a electric switch to lock it in, my question is it a toggle switch or a two button switch for off and on. And i was wondering where people have their switches mounted for the locker.
 
#2 ·
Several folks have done this, you may want to run a 'search'.

DEWFPO
 
#3 ·
Installation is simple.Correct set up can be a *****.If after it is installed with stock shims and the backlash doesn't measure correctly,you gotta do some figuring and do it again adding or removing shims to move it one way or the other until it comes out correct.If you can use a dial indicator proficiently and set it up correctly to check back lash,it isn't too hard.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top