Diesel Place banner

1 - 2 of 2 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
Just wanted to share my dual alternator project is finally complete and wanted to share how I did it.
I have planned on doing this project for almost 2 years and I finally felt confident that I had the proper solution for the needed support bracket for the additional alternator. There are a few kits out there but they seem to be pretty pricey, so I took a different approach upon an idea from a friend of mine to use the old style Chevy alternator bracket that many of us are so familiar with.
I sourced most of the parts through Amazon and the auto parts store. You will also need some grade nuts and bolts which are 10mm - n - 1.5 thread, sorry but I did of keep track of the lengths, however I would suggest removing the current bolts from the alternator and idler pulleys for a point of reference.

From Amazon....
-ACDelco PT1383 GM Original Equipment 2-Way Female Alternator Pigtail $22
-Spectre Performance 42263 Alternator Bracket Kit $12
-Set of 3 ACDelco 15-40526 GM Original Equipment Drive Belt Idler Pulley $18

From AutoZone...
-Duralast Serpentine 1370K6 (They offer a listing for a dual alternator part in the lookup) $31

I made a video showing how: https://youtu.be/fqA06j5dKX4
Comments and ideas are always welcome.
Good Luck!:bounce:
 

·
Registered
Joined
·
2,513 Posts
Long time member with Three post in thirteen years.
I take it, this is for a 2006-2007
Should of started your thread here (Electrical) thats where all the duel aternator threads are at.
 
1 - 2 of 2 Posts
Top