Diesel Place banner

Status
Not open for further replies.
1 - 20 of 34 Posts

·
Registered
Joined
·
1,178 Posts
Discussion Starter #1
I went through the shop today and found some stuff that needs gone.I have almost 10,000 square feet and no more room.I'll let this stuff ride here for a while then it's going on Ebay.

Edge Juice w/Att,newest version w/ATS overhead mount,needs a new EGT probe(should be free from Edge) $550 shipped.

Cognito steering supports,used for 12,000 miles $150 shipped.

Cognito HD tie rod kit,used for 12,000 miles $250 shipped.

Cognito HD tie rod kit almost new(less than 100 miles) $300 shipped.

77-91 GM SRW Dana 60 4.10 $1000 neg. Matching rear available.

2500 front diff,110,000 miles,make offer.

Complete front suspension from 2005 2500HD 4x4 minus diff and rotors, 27,000 miles,let me know what you need and make an offer.

New Yukon 4.56 front gears and install kit for 2500 $300 shipped.

G80 11.5 locker, 27,000 miles, $ 150 shipped.

I also have several 454's,Th400's,NP205's,14 bolts,Dana 60's and aftermaket parts,HP BBC engine parts,various 8 lug aftermarket wheels,and several set of larger offroad tires form 305/70R16's up to 18/44/16.5's,most are 16 or 16.5.

I do accept Paypal,pictures available on request,I'll post or e-mail them within 24hrs.
Thanks,Bill
 

·
Registered
Joined
·
361 Posts
PM Sent
 

·
Registered
Joined
·
2,393 Posts
is the locker from the front, if so I'm interested in it
 

·
Registered
Joined
·
1,178 Posts
Discussion Starter #4
No it's a good stocker for the rear.Sorry no front lockers or LSD's
 

·
Registered
Joined
·
2,393 Posts
ok, I thought that maybe you had bought one for the front for pulling
 

·
Registered
Joined
·
1,178 Posts
Discussion Starter #6
I'd like one,but it's not in the budget for this season. Are you going to pull anywhere this year? What part fo PA are you from?
 

·
Registered
Joined
·
2,393 Posts
I'm not sure at this time, have to build some stuff first. I am in the Somerset area.
 

·
Registered
Joined
·
1,178 Posts
Discussion Starter #8
We went to a pull up that way last summer that got rained out,can't remember the name of the town. We're going to pull the USA-east series,Smithton Hole,and some DHRA pulls here and there. Hope to see you around a few.
 

·
Registered
Joined
·
326 Posts
Is that locker something a DIY'er can install?
 

·
Registered
Joined
·
1,673 Posts
I have the same Dana 60, do you have any 35 spline parts for it? Or a re-built kit?

What about any 17" 8-lug rims?

Thanks,
Bentley
 

·
Banned
Joined
·
1,214 Posts

·
Registered
Joined
·
1,178 Posts
Discussion Starter #13
I have the same Dana 60, do you have any 35 spline parts for it? Or a re-built kit?

What about any 17" 8-lug rims?

Thanks,
Bentley
I have a full set of Yukon 35 spline chromemolys,CTM joints,and Terra Low lockouts. All of this is brand new. I built the axle and never used it. I also have a OX cable actuated front locker,5.13 gears,new Yukon 30 spline Chromoly stub shafts,and Yukon rebuild kits.

As for the wheels I have 5 Eagle 195's that will need polished or powder coated in 17x8 5" backspacing,local sale is pending,I'll let you know if it falls through.
http://www.aewheel.com/eagle_alloy_wheels.cfm?id=257
 

·
Registered
Joined
·
1,178 Posts
Discussion Starter #14

·
Registered
Joined
·
1,178 Posts
Discussion Starter #15
pics and sizes of rims and prices please [email protected]
Tell me what your looking for out of the list and I'll get you some pics:

4 Weld Outbacks 16x10 4 5/8 backspacing almost new $800 plus shipping.

5 Eagle 195's 17x8 5 backspacing,will need poliched or PC'ed $500 plus shipping.

4 American Racing 16.5x9.75 old school saw blades PC'ed silver $250 plus shipping.

4 Eagle 058's 16.5x12 4 5/8 backspacing nice shape $350 plus shipping.

4 Weld Typhoons 16.5x12 4/5/8 backspacing new $850 plus shipping.

4 American Racing 16x7 saw blades peeling clearcoat $100 plus shipping.

All the wheels are 8 on 6.5 bolt pattern.
 

·
Registered
Joined
·
3,234 Posts
what kind of tires you have in 315/75/16 and what kind of wear...also would be interested in the newer hd tie rod kit and the steering support..thanks Julian
 

·
Registered
Joined
·
1,178 Posts
Discussion Starter #17
what kind of tires you have in 315/75/16 and what kind of wear...also would be interested in the newer hd tie rod kit and the steering support..thanks Julian
I have a brand new set of BFG Mud T/A's,never been mounted $750.

Both tie rod kits are still available and the support kit is sold. I may have another support kit available soon.
Thanks,Bill
 

·
Registered
Joined
·
1,673 Posts
I have a full set of Yukon 35 spline chromemolys,CTM joints,and Terra Low lockouts. All of this is brand new. I built the axle and never used it. I also have a OX cable actuated front locker,5.13 gears,new Yukon 30 spline Chromoly stub shafts,and Yukon rebuild kits.

As for the wheels I have 5 Eagle 195's that will need polished or powder coated in 17x8 5" backspacing,local sale is pending,I'll let you know if it falls through.
http://www.aewheel.com/eagle_alloy_wheels.cfm?id=257

You have a PM!

Bentley
 

·
Registered
Joined
·
1,178 Posts
Discussion Starter #19
Ttt
 
1 - 20 of 34 Posts
Status
Not open for further replies.
Top