Diesel Place banner
1 - 5 of 5 Posts

· Registered
Joined
·
232 Posts
Discussion Starter · #1 ·
Don't know where to put this so here goes. Has anyone done an upgrade to their brake system, especially those with lifts or large tires? If so what is a good one to go with? :)
 

· Registered
Joined
·
194 Posts
I would like to know this as well. I see that Wilwood has one and know that SSBC has one (just became a dealer for SSBC) but they don't have a big brake kit or a rear caliper yet. Any input here would be good.
Kevin
 

· Registered
Joined
·
1,567 Posts

· Registered
Joined
·
411 Posts
Look at the Power Slot rotors and Hawk pads. They will give you the performance braking that your looking for. They sand cast thicker cooling fins, plate each rotor with Cadmium and can even get you Cryo or frozen rotors, which help the molecules spread out in a more even pattern to aid in eliminating hot spots.
 

· Registered
Joined
·
7,605 Posts
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top