Diesel Place banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
I have a 1993 6.5 turbo diesel....mechanical. I recently had the engine rebuilt. I have excessive blow by to the degree oil is blow out the seal. CCV is new. Also moisture on the dip stick, oil is clean. Number 8 cylinder was sleeved. These engines are a work horse. Still ran with a hole in #8 and cracks in all the rest. Any help would be appreciated.
 

·
Administrator
Joined
·
15,989 Posts
Welcome to DieselPlace
Do you have the CDR valve connected correctly, as in OEM condition?
If your CDR is vented to the atmosphere that is your issue.
 

·
Registered
Joined
·
2,642 Posts
I have a 1993 6.5 turbo diesel....mechanical. I recently had the engine rebuilt. I have excessive blow by to the degree oil is blow out the seal. CCV is new. Also moisture on the dip stick, oil is clean. Number 8 cylinder was sleeved. These engines are a work horse. Still ran with a hole in #8 and cracks in all the rest. Any help would be appreciated.
A video would be good, remove the oil fill cap so we can see the amount of blow by...
 
1 - 3 of 3 Posts
Top