Diesel Place banner

BFG All Terrains

1041 Views 11 Replies 10 Participants Last post by  Duromax04
Just spent quite a bit of time reading about tires here and looks like I'm going to go with the BFG A/T 285 75 16's. My question is do I need to do any suspension Mods gonig to a bigger tire and what psi are you guys runing in these tires?
1 - 2 of 12 Posts

You dont have to do any trimming if you crank your tortion bars. Dealer cranked mine 6 turns and they didnt rub at all. I did however have to do some trimming when I bought new rims. The factory wheels are 16.x 6.5 and generally not reccomended for 285's. I ran them for years on stock wheels with no problems as did a ton of other people. My wheels now are 16x8 and I had to crank some more as well as trim a little bit.

I generally ran them at 60 or so PSI. Some run more and some run less.

The BF A/T's are great tires.
There's only a couple hundred lbs of difference between the two.
1 - 2 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.