[tx911]

I have a 04 duramax with a LB7. I just finished installimg a six gun w/speed loader. The led light is flashing a 2,4 code which states in the manual to check the TCC connections. The connections are good, when the code started I thought the wire taps might be the culpret, so I soldered the wires to the proper connection, I tested continuity through the entire TCC wire harness. Everything seems to be fine. I have no added power and the led is flashing the 2,4 code. any suggestions would be appreciated Thanks

 

[scottdcoffey]

Is it a new unit? Call the Banks tech help... I've had one on my truck for a year and had no issues...
Sorry, that's not much help...

 

[tx911]

I got the unit yo work after all. Thanks to all who took the time to look and for the reply.

The six gun make good power, but the defueling between shifts is a little odd. If I stack another programmer like the predator with it will this defuel be a little less noticeable?

 

[rolloffhill]

Yes, stack it. What was wrong with it?

 

[Duramaxdude03]

hey tx let me know whats the stacking like

 

[NoWake200]

TX911, if you are going to stack you should upgrade the transmission. If you already did, then disregard.

 

[stdking]

if you get 2, 4 (i cant remember) but it is either a clogged fuel filter or slipping tranny

 

[whitewhale]

stacking

stacked my six gun ss with predator and ran good until the trans limps witch i limps really easy with this combo