Diesel Place banner

Attitude says My Temp is 2500°

847 views 7 replies 7 participants last post by  marksrt43 
#1 ·
I know it's the EGT sensor. Can I replace it with any make or do I have to use Edge?

Thanks.
 
#3 ·
Actually call edge and they should send you a new one free of charge. If not i think any K type probe should work
Yes call Edge,but I have a feeling some probes might give different readings.I dont know for sure though.
 
#5 ·
To be safe ~ use the one furnished by Edge as it has a grounded braided shield to prevent interference i.e the starter may induce a voltage spike during the start sequence.
 
#6 ·
I think most available probes are the same. I would definately call edge first. Free is always better than having to buy one.
 
#7 ·
The one I got from Banks is unshielded
 
#8 ·
The probe looks like the Autometer type, you may be able to run it with one of those.....
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top