Diesel Place banner
1 - 4 of 4 Posts

·
Registered
Joined
·
1,524 Posts
Discussion Starter · #1 ·
I know there is A LOT of info on cab lights. I know there is potential to hook up on the passenger side of the dash. I've been looking, but CAN NOT find anyone to tell me EXACTLY where to tap in on an '07 Classic, only info I find is on earlier trucks, BUT IT DON'T LOOK THE SAME. I know I can splice into any parking light powered wire, but would like to just wire to the p.s. dash harness and be done. So, '07 Classic owners, probably '06 owners, give it up. Thanks.
 

·
Registered
Joined
·
1,524 Posts
Discussion Starter · #2 ·
Anyone???
 

·
Registered
Joined
·
4,399 Posts
Pull off that side cover on the passenger side of the dash. There should be a a spot where a plug would go that only has 2 electrical terminals. Grap a test light or a VOM, and test each of the 2 terminals. One is + with the lights on and the other is -. Test with both the lights on and off, this should give you the correct spot to tap into.
 

·
Registered
Joined
·
1,524 Posts
Discussion Starter · #4 ·
Thanks.
 
1 - 4 of 4 Posts
Top