Diesel Place banner

37" Tires with a 6" Lift

1702 Views 11 Replies 10 Participants Last post by  jdugie123
Do you guys know if you can use 37" tires on a 6" lift. Someone who is interested in my lift kit is wondering about that.
1 - 2 of 12 Posts
I'm up in the air about this very question. I think there needs to be some specification made between spindle and non-spindle kits. The widened track of a spindle kit is going to remove clearance. There is no doubt about it. If you're using a full-drop kit where both upper and lower arms are lowered like Full Traction, Superlift, Procomp, or CST, I would think a larger tire is going to clear. Any thoughts?
moore87;1543344; said:
a spindle kit pushes the tires outward making the tire swing more as it turns. It does cause issues towards the cab and bumper
1 - 2 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.