Diesel Place banner
1 - 9 of 9 Posts

· Registered
Joined
·
1,190 Posts
They fit on mine...305's on 16X9 wheels. You have to crank and do some trimming, but mine won't rub.
 

· Registered
Joined
·
84 Posts
They fit in mine also. Stock wheels TB cranked and no trimming
 

· Registered
Joined
·
338 Posts
yes no problem. check my garage.
 

· Registered
Joined
·
514 Posts
run a 285-75-16 instead. the 305 is pushing the limit of the stock wheel width. you'll get poor tread wear if you don't maintain a proper psi.

the 285 is just as tall, only a little more narrow. my 285s fit with no prob
 

· Registered
Joined
·
1,291 Posts
they'll fit.
 

· Registered
Joined
·
1,232 Posts
they will fit but ull need to crank the torsion bars and do some trimming. how much trimming will depend on the wheel width and backspacing. id suggest atleast a 8" wide rim for them. also i would run them on stock wheels since the stock wheel is only 6.5" wide.
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top