[Duramaxallison08]

295/75/r16...will they fit on a stock hight 2500hd, without cranking the t bars or put on a leveling kit?

Kyle

 

[GMC2500HD]

IIRC you can make them fit but it will not be pretty, or you will need to raise the torsion bars and you might have to do some minor trimming on the valence, but should not be an issue.

 

[Cheyenne19]

Yes they will fit. As long as you don't mind cutting some plastic you'll be fine.

 

[Duramaxallison08]

will i need to do that if i put 285s?

kyle

 

[gmccall]

Hope you have wider wheels than the 6.5" wide stock wheels

My BFG 265x75x16 tires do not fit well on my stock rims. Any tire pressure over 55lbs will result in the edge of the tires not touching the pavement.
I would think the 295s would require a wider wheel.

 

[GMC2500HD]

I ran 285's on stock wheels on my 04 and ran 55psi in them most of the time and they wore great. I think you could get away with those but you will have to crank the t-bars slightly or they will rub.

 

[Cheyenne19]

will i need to do that if i put 285s?

kyle

295's will require just a little more than 285's, but not much. They are .6" taller and .39" wider.

 

[Sierra DMAX]

I've got 295 BFG's on stock rims. Had to turn up the torsion bars and trim a little, but they fit fine. Want to go up to 315's next.

 

[Cheyenne19]

I've got 295 BFG's on stock rims. Had to turn up the torsion bars and trim a little, but they fit fine. Want to go up to 315's next.

check my sig

 

[thrift16]

295/75/r16...will they fit on a stock hight 2500hd, without cranking the t bars or put on a leveling kit?

Kyle

I have them on my 03 but had to crank my bars a little bit