Diesel Place banner

1 - 4 of 4 Posts

·
Registered
Joined
·
91 Posts
Discussion Starter #1
My 2011 2500hd has the isolated center link where the pitman arm attatches. This has been a source of steering mushiness since the truck was new but now is really needing replacement.
Does anyone know if the center link without the rubber isolation will bolt in and what else would need to be changed, idler arm, pitman arm?
If anyone has the GM part number for the non-isolated piece it would be much appreciated.
Will the Cognito brace work with both center link styles ?
 

·
Registered
Joined
·
571 Posts
You will be fine just simply swapping over to the NON-isolator center link. We have been selling the Cognito PISK3008 brace kit that includes both style braces to fit the same pitman arm pending if you have the isolator or not.
 

·
Registered
Joined
·
91 Posts
Discussion Starter #3
Thanks Norcal, I just need to find the right part number to order one now. I think it is 19256658 for the non-isolated part but would like to be sure before I order.
The online parts lookups all show the same pic which is the isolated part but have two different part numbers depending on cab style.
From what I can tell the reg cab and ex cab are isolated but the crew cab is non isolated ?
 

·
Registered
Joined
·
571 Posts
Thanks Norcal, I just need to find the right part number to order one now. I think it is 19256658 for the non-isolated part but would like to be sure before I order.
The online parts lookups all show the same pic which is the isolated part but have two different part numbers depending on cab style.
From what I can tell the reg cab and ex cab are isolated but the crew cab is non isolated ?
That is what looks to be the case BUT unfortunately, we do not see enough of them to nail it down for a confirmation.
 
1 - 4 of 4 Posts
Top