Diesel Place banner
21 - 24 of 24 Posts

· Registered
Joined
·
214 Posts
On boats that we build we stage the filtration. We use a 30 micron and then step it down on the second to 10.This is done so we don't wipe out and clog on filter too fast. Jumpin Jesus, what kind of diesel system do we have that needs 2 micron filters.....
 

· Registered
Joined
·
10,850 Posts
One of my local customers is good friends with the VP of Crystal Flash. I dont know how big they are around the country but they are a major supplier around this area. He has been keeping him informed of all of our troubles and he is getting a good response from them.. I dont know what will become of it, but now the fuel manufactures are involved!


Eric
 

· Registered
Joined
·
69 Posts
ERic


I will be installing the racor 490 this weekend in place of the OEM.


Water sensor heater and PRIMER all in one. I asked you once before if the oem wiring would accept the 200 watt racor heater and you never gave me an answer. Could you check into it?


Rana
 

· Registered
Joined
·
446 Posts
"On boats that we build we stage the filtration. We use a 30 micron and then step it down on the second to 10.This is done so we don't wipe out and clog on filter too fast"


IMHO that's exactly why we need to do the same with our trucks, However a sufficently large 2 micron would probably work, but I doubt that a large enough single stage 2 micron would fit on the stock head.
 
21 - 24 of 24 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top