Diesel Place banner

1 - 3 of 3 Posts

·
Registered
Joined
·
89 Posts
Discussion Starter #1
On my 94 3500 my front wheels lean. The tops lean in toward the middle of the truck. I have jacked the truck up and everything seems good and tight, nothing appears to be wore out.There is no slop anywhere on it.What could be wore out?
 

·
Registered
Joined
·
89 Posts
Discussion Starter #2
No one has had this problem?
 

·
Registered
Joined
·
1,651 Posts
Put a jack right underneath the lower a-arm and check for slop in the lower and upper ball joint. There is alway's pressure on the ball joint's due to the torsion bars pulling down on the lower a-arm and the upper a-arm acting as a stop. It basicly pulls it tight and takes the slop out of everything. I apologise if you already checked it this way.
 
1 - 3 of 3 Posts
Top