Diesel Place banner

1 - 6 of 6 Posts

·
Registered
Joined
·
272 Posts
Discussion Starter · #1 ·
Hey guys, I gotta 10.5 axle underneath my HD, and from the location of the fill plug, it looks like the plug is below the bottom of the axle tubes. If this is true, how do the hubs get any oil? Maybe I was just not looking at it right? Btw, the fill plug is on the side of the housing on the 10.5, thanks.
 

·
Registered
Joined
·
1,380 Posts
yup, thats the fill hole, it wil get just a little bit of oil down to the hubs, or you can do like i do and hurry up and squirt another bottle in and hurry up and shove the drain plug in befor it all runs back out!!!!!!!!!! i usually try to do that just so i'm sure there is enough oil in there, + a little extra will never hurt!!
 

·
Registered
Joined
·
6,918 Posts
The 6.0 powered trucks don't get the 11.5 gear, Jeremey...The 11.5 is used for 8.1L and Duramax powered trucks... :)
 

·
Registered
Joined
·
4,643 Posts
thats right, brain fart. i guess thats what you expect when you plow snow all night!
 
1 - 6 of 6 Posts
Top