Diesel Place banner

1 - 8 of 8 Posts

·
Registered
Joined
·
804 Posts
Discussion Starter #1
I 'm wanting to put some 1.5" spacers on my 2500 HD. Will I have too trim down my wheel Studs. I think the studs are @ 2" long. Thanks for any input,Troy.
 

·
Registered
Joined
·
1,795 Posts
no.... the spacer should bolt to axle, then wheel bolts onto spacer
 

·
Banned
Joined
·
2,530 Posts
Yes you will. I have 2" spacers and they barely clear the studs. you just need to cut off the un treaded part of the studs. I would rather have the 1.5s since the 2s make the wheels stick out a little far....
 

·
Registered
Joined
·
522 Posts
I run 1.5" as well. Exactly what BlueOX03 said!!!
 

·
Registered
Joined
·
510 Posts
spacers

I have 1.5" and you need to trim the studs a little.
I like the wider rear stance and the tracking.
 

·
Registered
Joined
·
362 Posts
Are you guys running these spacers on the rear only to correct the track differences from front to back? Any pics or links?

Thanks
 

·
Registered
Joined
·
804 Posts
Discussion Starter #7
thanks for the input. I'll do the 1.5". I also think 2" is just to far out. Thanks,Troy.
 

·
Registered
Joined
·
522 Posts
Spacers just in the rear, my lift already moved the front out by 3/4" or so.
 
1 - 8 of 8 Posts
Top