has anyone ever changed the rear engine cover on these? I seen mine is busted after removing the trans and I know I have to drop the oil pan but is possible to pull the bolts out of the pan and let it hang a little bit to the the cover off or is there some sort of bolt from the inside the block?
Jatlyn fuller
03 lb7 rear engine cover replacement.
1 reading
Welcome to DieselPlace
Please tell us a little more about the vehicle ( Make, Model ) and list all mods.
Please tell us a little more about the vehicle ( Make, Model ) and list all mods.
I have personally done this on an 02 lb7. Differential and steering can stay in place. Theres a small crossmember below the lower oil pan. Pull that and the pan. Pull the flywheel. Pull the turbo oil drain. Drain the coolant. Remove bolts to anything else attached to the rear cover. Oil cooler can stay in place just unbolt the elbow. Remove the studs in the cover from the turbo oil drain. There that inverted torx style. There are a few that go into the botom of the cover though the oil pan I beleive. I never removed the upper oil pan. There are dowel pins in the uper oil pan so go up and out with the cover. Thats the major stuff atleast. Its a royal pita. But if u ever want to do a downpipe or uppipes now is the time.
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
