Diesel Place banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Electrical
    Took my battery cables off. The entire cable that runs from driver side to pass side batteries and down to the start with a few grounds and hot wires running off. Took them off and couldn’t find the complete harness anywhere. A month later I had a guy build me a new set and now I have forgotten...
  2. Duramax Fourth Generation: 2007.5-2010 (LMM)
    I am replacing my factory y-bridge and I'm having a problem with the last bolt. It is the back-top passenger side bolt. There is about a 1/4" clearance between the bolt head and the turbo compressor housing, and that is not going to be enough to slide the bolt out (I had to modify wrench just...
  3. 6.5L Diesel Engine
    Let me admit this first I am not a grease monkey or a regular wrench-turner. In fact, without the help from a grease monkey friend I would have never had the confidence to undertake this project. But, what I found out is I could do this and after the project is over I feel really empowered...
  4. Duramax First Generation: 2001-2004 (LB7)
    I just got a quote of 1500+ at a chev dealer to replace the starter in my 2004 cab/chasis 3500. They need to remove the exhaust to get to it. Any comments on this? Am I getting taken?
  5. Do It Yourself, Useful Articles & Product Reviews
    What follows is how we replaced the injectors on my 03 LB7. I AM NOT A GM TECH, please follow these at your own risk. I am a DIY'er, sharing our experience, with this task. The parts we used; 97729095* Injector Kit, Dir Fuel (Incls:Injector,Gasket,Seal) 8 97188896 Gasket, Valve Rocker Arm...
1-5 of 5 Results