Originally Posted by smdk2500
Just to make sure that we are talking about the same thing. What Im needing is for the hard lines coming from the IP to the injectors. I have the bracket that bolts to the valve cover but not the rubber that goes inside it.
Sorry, I thought you were talking about the Injector return line clamps
1996 K3500 6.5L,( "F" Eng #141 cast block) 5 speed manual, crewcab, dually longbed: 208,000mi.
Diamond Eye 4" Turbo Back Exhaust w/2.5" Flo-Pro Crossover
AirDog II DF165 w/ tank sock delete - XDP
TD-Max boost controller - Kennedy Diesel
OPS extension hose - Leroy Diesel
Glow Plug Harness- PT Wiring Solutions
Glowshift Maxtow EGT,Boost, Fuel gauges
Boost & Fuel Pressure Bolts - Leroy Diesel
2/0 Battery Cable Upgrade - PT Wiring Solutions
PMD w/#9 resistor and Re-Location Kit, mounted to bumper - Leroy Diesel
4.10 gear ratio
OptiLube Summer+ Formula
Proud member #1039 of The 3500 Dually Club