Originally Posted by BubbaA
Thanks for the info. I was able to get it refilled and appears to be working ok. However, i did fill the non pressurized side of the recovery tank to 1/3 full as it mentioned, but as the truck was warming up it pushed water into the non presurized side and filled it to half full. When it finally warned up enough to suck the water in it only pulled from the pressurized side. is that normal. I assume it would suck from the non presurized side till it was empty an then suck from the pressurized side.
Did you put the cap back on while it was hot, so that the cap was in place while it was cooling?