Diesel Place : Chevrolet and GMC Diesel Truck Forums - View Single Post - LBZ: Hot Brakes!
Thread: LBZ: Hot Brakes!
View Single Post
Old 08-24-2019, 07:06 PM   #2 (permalink)
Diesel Prodigy
Join Date: May 2015
Posts: 4,184

take the calipers off
clean out the caliper pin slide holes and caliper pins
squeeze in the caliper pistons, then make sure the inside pad can easily slide in it's groove (wirebrush/file off rust from the slots to enable it to slide as necessary)

put new brake caliper grease (NOT CHASSIS GREASE) in the slide holes, then install new boots for the holes (it's easier to put new grease in before installing the boots)
reinstall caliper and make sure it can slide on the pins
remove caliper and reinstall with pads
drive around and see if it's better now

2004 GMC Sierra 3500 C&C, added 4WD, 6.0L gas, Extended Cab, SLE, Transgo 4L80e-HD2 kit installed
Whee! Dually Club Member #1109
Offline   Reply With Quote