Diesel Place : Chevrolet and GMC Diesel Truck Forums - View Single Post - LML: 13 lml won’t start after fpr1 replacement
View Single Post
Old 08-23-2019, 02:11 PM   #1 (permalink)
TexasCaveman
Gear Grinder
 
Join Date: Aug 2019
Posts: 2

13 lml won’t start after fpr1 replacement

So I have a ‘13 lml deleted with a FASS lift pump. Recently been having loss of power/dying at low rpms, it showed “engine power derated”, and the p0091 fpr1 voltage low code. So I changed the pressure regulator on the injector pump. No shavings or anything to be concerned about when inspecting the old fpr screen. Put it back together yesterday afternoon. Ran for a second or two then died and hasn’t started since. Am pretty sure it’s not getting fuel. Made sure to prime the fuel system. Found one wire that was rubbing and fixed that. Even tried putting old fpr back in to see if the new one was bad. What am I missing y’all? Thanks!

__________________
2013 lml deleted with a FASS lift pump.
Offline  
Reply With Quote