Diesel Place : Chevrolet and GMC Diesel Truck Forums - View Single Post - Crank no start after engine replacement
View Single Post
Old 08-12-2019, 09:38 AM   #3 (permalink)
sfcjones
Diesel Legend
 
sfcjones's Avatar
 
Join Date: Mar 2007
Location: Back in South GA...
Posts: 16,133

First thing...Never Use ether. If the glow plugs come on and ignite the ether the sound you would hear wouldn't be good news. I would start at the fuel filter housing. Prime it up and then check to see if it will start. If you are confident you are getting fuel then start looking at fuses. Stay with basic troubleshooting.
Requirements for diesel engines to start is air and fuel and of course the ECM.
I also have to ask is if Jasper sent you a period correct motor. You should have a LBZ motor or...a LLY depending on your VIN. Wrong motor could be a issue as well.
__________________
Tim
2009 Chevy CC 2500HD LTZ LMM Z71 283k miles
2004 GMC SLT LB7 CC 455k Miles (Retired)(Sold)
2007 Chevy Tahoe with Ranch Hand 240k Miles
2010 Chevy Suburban LTZ 75th Diamond Edition, 106k Miles
Member #67 A(ACLU) Agent Sgt. Slaughter
DP Jug Holder #3
US Army Veteran 25 Years of Service
You haven’t lived ‘til you’ve almost died. For those who have fought for it, life has a flavor the protected will never know.(MACV-SOG)
'A man will reveal his character through his actions, not his skin color.'
Romans 10:13 For Whosoever shall call upon the name of the Lord shall be Saved.
NRA Patriot Life Benefactor Member

Last edited by sfcjones; 08-12-2019 at 09:40 AM.
Offline   Reply With Quote