Diesel Place : Chevrolet and GMC Diesel Truck Forums - View Single Post - Open for suggestions...
View Single Post
Old 06-12-2019, 09:05 AM   #2 (permalink)
OkDually
Administrator
 
OkDually's Avatar
 
Join Date: Jul 2013
Location: N.E. Oklahoma
Posts: 14,063

Does the PMD have a resistor installed?
Remove the extension harness from the PMD and then connect the PMD to the OEM harness on the IP and see if anything changes.
Install a piece of clear fuel line on the return side of the IP to look for air in fuel.
https://www.dieselplace.com/forum/63...ml#post7305306

__________________
1996 K3500 6.5L,( "F" Eng #141 cast block) 5 speed manual, crewcab, dually longbed: 208,000mi.
Diamond Eye 4" Turbo Back Exhaust w/2.5" Flo-Pro Crossover
AirDog II DF165 w/ tank sock delete - XDP
TD-Max boost controller - Kennedy Diesel
OPS extension hose - Leroy Diesel
Glow Plug Harness- PT Wiring Solutions
Glowshift Maxtow EGT,Boost, Fuel gauges
Boost & Fuel Pressure Bolts - Leroy Diesel
2/0 Battery Cable Upgrade - PT Wiring Solutions
PMD w/#9 resistor and Re-Location Kit, mounted to bumper - Leroy Diesel
GM-5 Turbocharger
4.10 gear ratio
OptiLube Winter Formula


Proud member #1039 of The 3500 Dually Club

Offline   Reply With Quote