Originally Posted by speedextreme
Hello again. Long story short. I totalled my '05 LLY, bought an '06 LBZ but didn't like it. So I just traded the '06 for a '16 LML. I have a few parts from my 06 that I was going to modify to work on the 16. But I have a few questions to ask first.
1. The 2 sensors in the OEM intake are the M.A.F. and the other is what? It's rectangle in shape.
2. Got the Airaid cold air intake from the 06 to fit damn near perfect in the 16, but the MAF won't fit and I'd have to modify the "filter check" hole to accept the other sensor. Would this work as long as the holes are perfect size? I'd hate to waste a $400+ cold air intake.
3. I have the 3 or 4 bolt flanged downpipe. If I replace it with a big-band downpipe, could I use my 5" Magnaflow exhaust from the 06 if I cut and weld the hangars to where I need them?
4. Last one. I'd like to delete the DPF, DEF and EGR, is there a "handheld tuner" like my PPE that I can just put the tune I want in and the "deletes" are tuned out?
Thanks for all your help guys, I love this place, haven't been on in a while. I'll post some pics in the LLY section of my truck when the accident happened.
Congrats on your "new to you" 16' LML.
Be sure to update your signature info !
1996 K3500 6.5L,( "F" Eng #141 cast block) 5 speed manual, crewcab, dually longbed: 208,000mi.
Diamond Eye 4" Turbo Back Exhaust w/2.5" Flo-Pro Crossover
AirDog II DF165 w/ tank sock delete - XDP
TD-Max boost controller - Kennedy Diesel
OPS extension hose - Leroy Diesel
Glow Plug Harness- PT Wiring Solutions
Glowshift Maxtow EGT,Boost, Fuel gauges
Boost & Fuel Pressure Bolts - Leroy Diesel
2/0 Battery Cable Upgrade - PT Wiring Solutions
PMD w/#9 resistor and Re-Location Kit, mounted to bumper - Leroy Diesel
4.10 gear ratio
OptiLube summer + Formula
Proud member #1039 of The 3500 Dually Club