Diesel Place : Chevrolet and GMC Diesel Truck Forums - View Single Post - 6.5L non-turbo w/ DB2 - how to remove throttle shaft?
View Single Post
Old 08-27-2017, 06:49 PM   #3 (permalink)
DieselPro
Diesel Guru
 
DieselPro's Avatar
 
Join Date: Mar 2004
Posts: 7,122

You knock them in and out with a hammer. Some are a little tight but will come out. Regular ballpein hammer should do it.

Where you have to be careful is tightening the face cam. Just enough to snug it up is fine. Go more than that and the face cam will crack.
Offline   Reply With Quote