Just wanted to share my dual alternator project is finally complete and wanted to share how I did it.
I have planned on doing this project for almost 2 years and I finally felt confident that I had the proper solution for the needed support bracket for the additional alternator. There are a few kits out there but they seem to be pretty pricey, so I took a different approach upon an idea from a friend of mine to use the old style Chevy alternator bracket that many of us are so familiar with.
I sourced most of the parts through Amazon and the auto parts store. You will also need some grade nuts and bolts which are 10mm - n - 1.5 thread, sorry but I did of keep track of the lengths, however I would suggest removing the current bolts from the alternator and idler pulleys for a point of reference.
-ACDelco PT1383 GM Original Equipment 2-Way Female Alternator Pigtail $22
-Spectre Performance 42263 Alternator Bracket Kit $12
-Set of 3 ACDelco 15-40526 GM Original Equipment Drive Belt Idler Pulley $18
-Duralast Serpentine 1370K6 (They offer a listing for a dual alternator part in the lookup) $31
I made a video showing how: https://youtu.be/fqA06j5dKX4
Comments and ideas are always welcome.
Long time member with Three post in thirteen years.
I take it, this is for a 2006-2007
Should of started your thread here (Electrical) thats where all the duel aternator threads are at.
|All times are GMT -4. The time now is 06:48 AM.|
Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Shoutbox provided by vBShout v6.2.1 (Lite) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd. Runs best on HiVelocity Hosting.