Diesel Place banner

285/75r18 what did you do to make it fit?

11K views 7 replies 6 participants last post by  tmougeotte 
#1 ·
Looking to go up to a 285/75r18. Current setup is stock midnight edition 18s with 275/65 and I have tons of room. Don’t mind turning up bars slightly but want to keep ride quality and slight rake for heavy towing needs. Post pics if you’re running 285/75s
 
#4 · (Edited)
Nothing, 285/75R18 fit stock and fit leveled. No trimming, no rubbing.


Same with 35x12.50R18, zero rub on stock denali wheels.


Currently running 315/70R18 with stock wheels and Freds 1/4 inch spacers and slight rub on the frame at full lock. Required large fender mod.

Same setup on 2015 and current 2019 Denali 3500 SRW.
 
#6 · (Edited by Moderator)
285/65/20 fits on a 2015 2500 with torsion bars turned up to level the front. recommend new upper control arms for this route. now only rub is the right fender liner at full lock
 
#8 ·
I turned the T-bars a few turns and all is perfect. If you're a Z71 it should fit without anything being changed as the Z71 tends to come turned up a little vs the 4x4.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top