Diesel Place : Chevrolet and GMC Diesel Truck Forums - View Single Post - monitoring vane position
View Single Post
Old 09-13-2014, 09:48 AM   #3 (permalink)
SAYWHAT
Diesel Boss
 
SAYWHAT's Avatar
 
Join Date: Feb 2004
Location: Tomah,WI
Posts: 1,451

Thanks Rodney!Now another question about PIDs.I have an Actron CP 9575 scanner-reader with view data that reads PIDs sent out by the ECM but is not picking the PID VGT_A_ACT,B_ACT which is turbo vane position.The manual for the Actron has that PID listed and says it will read it if the vehicle ECM supports it.I wonder why the ECM is not sending it out to the scanner.Would I have the same problem with the Edge Insight or is the problem with my scanner?The scanner picks up other PIDs.
__________________
2007 Classic GMC D/A Ext. cab,s.b.,built 11-2006,Di*Priol boost and pyro gauges,GT3794VA turbo, Edge Insight CTS,Garmin GPS,MBRP catback exhaust,300* hose permanent fix tranny cooling lines,M/A pump rub kit,Prodigy bc,Reese 16,000 lb. slider 4-way tilt hitch.Luverne SS side steps,Truxedo bed cover, Duraflaps all 4 corners, Michelin LTX M/S 2 tires and Bilstein shocks.
Offline   Reply With Quote