L5P: 6 codes - Diesel Place : Chevrolet and GMC Diesel Truck Forums
 
Home Forum Market Place Garage Tuning Library DTC Tool Register Vendors
Go Back   Diesel Place : Chevrolet and GMC Diesel Truck Forums > GM Diesel Engines > Duramax Sixth Generation: 2017-2019 (L5P)
Register FAQ Forum Rules My Replies My Threads Advertise

Duramax Sixth Generation: 2017-2019 (L5P) Discuss the sixth generation of the 6.6L Duramax diesel engine & associated components. Engine related discussion ONLY.


DieselPlace.com is the premier Duramax Diesel Forum on the internet. Registered Users do not see the above ads.
Like Tree2Likes
  • 2 Post By Gofoff

Reply
 
LinkBack Thread Tools
Old 02-12-2020, 09:03 PM   #1 (permalink)
Gofoff
Gear Grinder
 
Join Date: Feb 2020
Location: NY
Posts: 3
iTrader Score: 0 reviews

6 codes

17 with 41k threw 6 codes,

P22A5
P100B
P0046
U010C
U029D
U029E
U02A3
U18A2

No power, limp mode, reduced speed. Got to dealer. Haven’t heard a thing. Any ideas?

__________________
2017 GMC 2500HD CC 4x4
Stock.
Offline  
Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 02-12-2020, 09:14 PM   #2 (permalink)
OkDually
Administrator
 
OkDually's Avatar
 
Join Date: Jul 2013
Location: N.E. Oklahoma
Posts: 14,740
iTrader Score: 0 reviews

DieselPlace.com Lifetime Premium Member

Welcome to DieselPlace

Please take a moment to fill out your signature with vehicle info ( Year, Make, and Model ) and list any known mods.

When this is completed it will appear with each post you create and will assist the other members when giving you diagnostic or repair advice



__________________
1996 K3500 6.5L,( "F" Eng #141 cast block) 5 speed manual, crewcab, dually longbed: 208,000mi.
Diamond Eye 4" Turbo Back Exhaust w/2.5" Flo-Pro Crossover
AirDog II DF165 w/ tank sock delete - XDP
TD-Max boost controller - Kennedy Diesel
OPS extension hose - Leroy Diesel
Glow Plug Harness- PT Wiring Solutions
Glowshift Maxtow EGT,Boost, Fuel gauges
Boost & Fuel Pressure Bolts - Leroy Diesel
2/0 Battery Cable Upgrade - PT Wiring Solutions
PMD w/#9 resistor and Re-Location Kit, mounted to bumper - Leroy Diesel
GM-5 Turbocharger
4.10 gear ratio
OptiLube Winter Formula


Proud member #1039 of The 3500 Dually Club


Last edited by OkDually; 02-12-2020 at 11:39 PM.
Online   Reply With Quote Quick reply to this message
Old 02-13-2020, 09:07 AM   #3 (permalink)
Rvn4me
Diesel Pro
 
Rvn4me's Avatar
 
Join Date: Jun 2016
Location: MI.
Posts: 2,438
iTrader Score: 0 reviews

Michigan Oil Burners Member

Quote:
Originally Posted by Gofoff View Post
17 with 41k threw 6 codes, P22A5,P100B, P0046, U010C, U029D, U029E, U02A3, U18A2
No power, limp mode, reduced speed. Got to dealer. Haven’t heard a thing. Any ideas?
Keep us posted. A lot of those codes I can’t find any definition.
U**** codes are communication codes between the modules.

This is the only code I could find that you have.
DTC P0046
Circuit Description
The position of the turbocharger vanes is controlled by the engine control module (ECM). The ECM utilizes a turbocharger vane control solenoid valve and a turbocharger vane position sensor to control the turbocharger vanes. When the engine is not under load, the turbocharger vanes are in an open position, or no boost condition. When the engine is under load, the ECM commands the control solenoid valve to close the turbocharger vanes, thus increasing the boost. The ECM will vary the boost dependant upon the load requirements of the engine. The vane control solenoid valve uses 2 circuits, a control circuit and a low reference circuit. The ECM uses a pulse width modulation (PWM) on the control circuit to control the solenoid valve. The ECM provides a ground on the low reference circuit. If the ECM detects that the commanded position of the turbocharger vanes does not match the actual position, DTC P0046 will set.

DTC Descriptor
This diagnostic procedure supports the following DTC:

DTC P0046 Turbocharger Vane Control Position Performance

Conditions for Running the DTC
The ignition is ON.

Conditions for Setting the DTC
The ECM detects that the commanded position of the turbocharger vanes does not match the actual position.

Action Taken When the DTC Sets
The control module illuminates the malfunction indicator lamp (MIL) on the second consecutive ignition cycle that the diagnostic runs and fails.
The control module records the operating conditions at the time the diagnostic fails. The first time the diagnostic fails, the control module stores this information in the Failure Records. If the diagnostic reports a failure on the second consecutive ignition cycle, the control module records the operating conditions at the time of the failure. The control module writes the operating conditions to the Freeze Frame and updates the Failure Records.
Conditions for Clearing the MIL/DTC
• The control module turns OFF the malfunction indicator lamp (MIL) after 3 consecutive ignition cycles that the diagnostic runs and does not fail.

• A current DTC, Last Test Failed, clears when the diagnostic runs and passes.

• A history DTC clears after 40 consecutive warm-up cycles, if no failures are reported by this or any other emission related diagnostic.

• Clear the MIL and the DTC with a scan tool.

Diagnostic Aids
If any service has been performed on the turbocharger or on the turbocharger components, a turbocharger relearn must be performed. Failure to perform the turbocharger learn procedure may cause this DTC to set. Refer to Turbocharger Learn Procedure .
For an intermittent condition, refer to Intermittent Conditions .

Last edited by Rvn4me; 02-13-2020 at 09:15 AM.
Offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 02-13-2020, 01:20 PM   #4 (permalink)
redwngr
Diesel Expert
 
Join Date: Jan 2008
Location: SW ONT
Posts: 2,786
iTrader Score: 0 reviews

P22A5 is - NOx sensor 2 Heater control circuit high voltage.

Perhaps harness damage / loose connection somewhere?
__________________
2018 L5P Sierra 4x4 SB Denali
Sold 2011 LML Sierra 4x4 CCSB SLT
Sold 2010 LMM Sierra 4x4 CCSB SLT
Sold 2004.5 LLY Sierra 4x4 ECLB SLE
Online   Reply With Quote Quick reply to this message
Old 02-13-2020, 04:54 PM   #5 (permalink)
Gofoff
Gear Grinder
 
Join Date: Feb 2020
Location: NY
Posts: 3
iTrader Score: 0 reviews

Just called the dealer they didnít give me much more information than what you guys were able to discern. They admitted that all the U codes are no com with the ECM and theyíre on the phone with GM to see whether they are going to replace the ECM or try something else. It really doesnít sound good. I havenít used the truck much because itís the off-season. My truck always smells terrible when itís in regen but the other day when it was in regen it kind of smelled like burning wires but the truck always smells horrible when itís in regen so I didnít really think too much of it but I wonder if that has something to do with it? It wasnít the next time I used the truck I got the CEL.

Wonder if I should start a claim with GM now?
__________________
2017 GMC 2500HD CC 4x4
Stock.

Last edited by OkDually; 02-14-2020 at 09:23 AM. Reason: sig
Offline   Reply With Quote Quick reply to this message
Old 02-14-2020, 08:33 AM   #6 (permalink)
Rvn4me
Diesel Pro
 
Rvn4me's Avatar
 
Join Date: Jun 2016
Location: MI.
Posts: 2,438
iTrader Score: 0 reviews

Michigan Oil Burners Member

I’m sure your dealer will open all your bale connections to all your modules and the Two large under hood ones.

Last edited by Rvn4me; 02-14-2020 at 08:34 AM.
Offline   Reply With Quote Quick reply to this message
Old 02-14-2020, 04:43 PM   #7 (permalink)
Gofoff
Gear Grinder
 
Join Date: Feb 2020
Location: NY
Posts: 3
iTrader Score: 0 reviews

Iím Iíve attached a picture of what the dealer did.

Drove it home about 10 miles, sofar so good.
Attached Images
File Type: jpeg 761BA417-84D9-480F-9053-E7A18E4FA934.jpeg (34.2 KB, 11 views)
__________________
2017 GMC 2500HD CC 4x4
Stock.
Offline   Reply With Quote Quick reply to this message
Old Yesterday, 09:43 AM   #8 (permalink)
Rvn4me
Diesel Pro
 
Rvn4me's Avatar
 
Join Date: Jun 2016
Location: MI.
Posts: 2,438
iTrader Score: 0 reviews

Michigan Oil Burners Member

Quote:
Originally Posted by Gofoff View Post
Iím Iíve attached a picture of what the dealer did.

Drove it home about 10 miles, sofar so good.
Picture a little fuzzy.
Offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Diesel Place : Chevrolet and GMC Diesel Truck Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

PLEASE READ! You must check your email inbox for the confirmation link to complete registration. Please check your spam box if you do not see the email in your inbox.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:
Insurance
Please select your insurance company (Optional)

Log-in



Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 04:24 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Shoutbox provided by vBShout v6.2.1 (Lite) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd. Runs best on HiVelocity Hosting.
© AutoGuide