Metallic Clanking on Decel - Page 3 - Diesel Place : Chevrolet and GMC Diesel Truck Forums
 
Home Forum Market Place Garage Tuning Library DTC Tool Register Vendors
Go Back   Diesel Place : Chevrolet and GMC Diesel Truck Forums > GM Diesel Engines > 6.5L Diesel Engine
Register FAQ Forum Rules My Replies My Threads Mark Forums Read Advertise

6.5L Diesel Engine Discuss the 6.5 GM diesel engine & associated components. Automatic transmission questions & problems belong in the 4L80/85 - 4L60E - 6L90 Transmission Forum

DieselPlace.com is the premier Duramax Diesel Forum on the internet. Registered Users do not see the above ads.
Like Tree8Likes

Reply
 
LinkBack Thread Tools
Old 03-26-2015, 10:26 PM   #21 (permalink)
grabowski
Whistle Pigs Are Cool
 
grabowski's Avatar
 
Join Date: Apr 2005
Location: The Syncro Ranch
Posts: 2,445
iTrader Score: 2 reviews

Old School Oil Burners (Old SOBs) Member

The Suburban Club Member

Quote:
Originally Posted by dieselmike1 View Post
What kind of oil are you using in your diffs.
Unsure other than it is synthetic. Might be Napa brand.

__________________
The highest recommendations are in Bold below
________
1985 GMC 6.2 manual 4x4 3/4+ton 64,013 miles (5-1-19)
______________
The Blowby Queen '94 Chevy 'burb Silverado K2500 4L80E 4.10. Quadstar Tuning.
Midland Diesel Las Vegas Diesel rebuilt 5221 Blue Label IP with ULSD Upgrade & rebuilt Bosch injectors @ 2200psi. 235-85 on 16" PYO alloys. Bilstein HDs, Hellwig rear sway bar. Heath TM. Fluidampr. S&B oiled filter Intake, Provent 200 W/catchcan. Bosch Duraterm GP W/PT Solutions GP harness. WJ FTB. AC Delco Tstat & Red Line Water Wetter. hxtasy PMD #2 resistor on Heath Isolator 4. LS 1/2" oil cooler & lines. OPS Relay Mod & Leroys Hose. Diamond Eye exhaust. Heath 2.5" crossover. W/T Grille. VDO EGT & Vac/Boost gauge with copper line & Leroys Boost Bolt.


- 12-13-16 Out Of Commission @ 194,680k, 50 miles after Teds Mil Takeout Install. Bad noises in the motor.
- 12-29-16 #7 lifters and pushrods replaced and still sounds like a metal trash can half full of hammers rolling down a scree field.
- 03-01-17 @ 194,802 miles she's no longer mine.

12-28-2016: I no longer recommend Badger/kr_services and Ted's Trucks
Offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 03-26-2015, 10:40 PM   #22 (permalink)
dieselmike1
Diesel Champ
 
dieselmike1's Avatar
 
Join Date: Oct 2011
Location: Missouri
Posts: 1,939
iTrader Score: 0 reviews

Old School Oil Burners (Old SOBs) Member

Quote:
Originally Posted by grabowski View Post
Unsure other than it is synthetic. Might be Napa brand.
Did you add a friction modifier additive to it?

__________________
2016 Chevy Colorado Z71, 2.8 Duramax, 4x4, C.C., shortbed.
Gone, but not forgotten. 2000 K3500 6.5 C.C. Dually
Proud Member#1076 of the 3500 Dually Club
Offline   Reply With Quote Quick reply to this message
Old 03-26-2015, 10:43 PM   #23 (permalink)
dieselmike1
Diesel Champ
 
dieselmike1's Avatar
 
Join Date: Oct 2011
Location: Missouri
Posts: 1,939
iTrader Score: 0 reviews

Old School Oil Burners (Old SOBs) Member

LOCKING DIFFERENTIAL LUBRICANT (SERVICE INFORMATION) #91-4-109
SUBJECT: LOCKING DIFFERENTIAL (G80) LUBRICANT - (SERVICE INFORMATION)
VEHICLES AFFECTED: ALL LIGHT TRUCKS EQUIPPED WITH G80 REAR AXLE ALL YEARS
Some light duty trucks equipped with locking rear axles (G80) may exhibit rear axle chatter, especially when turning a corner from a stop.
This condition of alternate engagement and disengagement of clutches in differential assembly is usually caused by contaminated axle lubricant.
To correct this condition, drain and refill the rear axle with SAE 75W-90 GL5 (P/N 12378261). The use of any additive in locking rear axles (G80) is not recommended. Rear axle additives are designed for use in limited slip differentials which are normally installed in cars. All light duty trucks equipped with RPO G80 make use of a locking differential and the use of additives will delay the engagement of the locking mechanism and may decrease axle life.VEHICLES/COMPONENTS INVOLVED: ----------------------------- Some light duty trucks equipped with locking rear axles, RPO G80.
SERVICE PARTS INFORMATION:
Part Number Description ----------- ------------------ 12678261 Lubricant, Rear Axle (1 litre)
Parts are currently available through CANSPO.
WARRANTY INFORMATION:
As specified in Light Duty Truck Maintenance Schedules, locking rear axle fluid drain and refill is required owner maintenance at the first engine oil change. Failure to drain and refill the rear axle as specified may contribute to a later axle chatter condition. Refer to the appropriate Light Duty Truck Maintenance Schedule or service manual, section OB, for further details on change intervals.
General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.
Copyright General Motors Corporation. All Rights Reserved.
__________________
2016 Chevy Colorado Z71, 2.8 Duramax, 4x4, C.C., shortbed.
Gone, but not forgotten. 2000 K3500 6.5 C.C. Dually
Proud Member#1076 of the 3500 Dually Club
Offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 03-26-2015, 10:48 PM   #24 (permalink)
dieselmike1
Diesel Champ
 
dieselmike1's Avatar
 
Join Date: Oct 2011
Location: Missouri
Posts: 1,939
iTrader Score: 0 reviews

Old School Oil Burners (Old SOBs) Member

More good info.
"From Mr. Ralph Holmquist of Eaton, the maker of the locking differential:
"The maintenance schedule for the rear axle was developed by American Axle &
Manufacturing and GM truck based on multiple tests. The Eaton locker does
not require additional maintenance nor does it add heat to the lube. The
lube will darken due to the carbon wear on the clutch surfaces, much the
same as a disc brake pad & rotor. This does not damage axle components such
as seals or bearings. However, a new axle can produce excessive
temperatures (plus 350 degrees F) due to the ring & pinion breaking in that
will break the lube additives down. Avoid high loads, trailer towing and
high speed extended driving during the initial break in of the vehicle.
After the break in period axle temps will level at a much lower figure.
Lube changes are a good idea because the additives are replenished and
contaminates such as casting sand are eliminated. The axle is filled at the
factory with a synthetic 75w90 GL5 rating made by Texaco under part # 2276.
The GM service # is 12378261. This is the only lube we have done extensive
testing with to insure locker compatibility. The only negative to using one
of these other lubes is an increased potential for clutch chatter. This
really doesn't hurt anything and can be corrected by changing the lube. I
noticed in the latest GM owners manual the term "or equivalent" when
referring to the lube specification. Look for a GL5 rating on the bottle to
make sure the ring & pinion, seals & bearings are protected. Limited slip
additive is not needed."
The following information outlines the type of
rear axle lubrication utilized in GM Truck axles.
I. Fluid Type
II. The 1500, 2500 and 3500 GMT 800 Trucks utilize SAE 75W-90 Synthetic Axle Lubricant. The GM part number is 12378261 and the specification is 9986115.
__________________
2016 Chevy Colorado Z71, 2.8 Duramax, 4x4, C.C., shortbed.
Gone, but not forgotten. 2000 K3500 6.5 C.C. Dually
Proud Member#1076 of the 3500 Dually Club
Offline   Reply With Quote Quick reply to this message
Old 03-27-2015, 01:22 AM   #25 (permalink)
HeavyChevy95
Diesel Veteran
 
HeavyChevy95's Avatar
 
Join Date: Jun 2008
Posts: 5,266
iTrader Score: 0 reviews

Thankyou dieselmike1 for posting the TSB regarding the G80's..

only time mine gets wierd is on slick surfaces, mud, snow, ice, rain, etc.. likes to lock up and can plow forward regardless if your want to turn.

nearly 400,000 miles on mine, diff covers never been removed..

knock on wood.

Last edited by HeavyChevy95; 03-27-2015 at 01:25 AM.
Offline   Reply With Quote Quick reply to this message
Old 03-27-2015, 12:29 PM   #26 (permalink)
grabowski
Whistle Pigs Are Cool
 
grabowski's Avatar
 
Join Date: Apr 2005
Location: The Syncro Ranch
Posts: 2,445
iTrader Score: 2 reviews

Old School Oil Burners (Old SOBs) Member

The Suburban Club Member

Quote:
Originally Posted by grabowski View Post
Unsure other than it is synthetic. Might be Napa brand.

Good Ole \Valvoline 80/90. Not synthetic due to G80.
__________________
The highest recommendations are in Bold below
________
1985 GMC 6.2 manual 4x4 3/4+ton 64,013 miles (5-1-19)
______________
The Blowby Queen '94 Chevy 'burb Silverado K2500 4L80E 4.10. Quadstar Tuning.
Midland Diesel Las Vegas Diesel rebuilt 5221 Blue Label IP with ULSD Upgrade & rebuilt Bosch injectors @ 2200psi. 235-85 on 16" PYO alloys. Bilstein HDs, Hellwig rear sway bar. Heath TM. Fluidampr. S&B oiled filter Intake, Provent 200 W/catchcan. Bosch Duraterm GP W/PT Solutions GP harness. WJ FTB. AC Delco Tstat & Red Line Water Wetter. hxtasy PMD #2 resistor on Heath Isolator 4. LS 1/2" oil cooler & lines. OPS Relay Mod & Leroys Hose. Diamond Eye exhaust. Heath 2.5" crossover. W/T Grille. VDO EGT & Vac/Boost gauge with copper line & Leroys Boost Bolt.


- 12-13-16 Out Of Commission @ 194,680k, 50 miles after Teds Mil Takeout Install. Bad noises in the motor.
- 12-29-16 #7 lifters and pushrods replaced and still sounds like a metal trash can half full of hammers rolling down a scree field.
- 03-01-17 @ 194,802 miles she's no longer mine.

12-28-2016: I no longer recommend Badger/kr_services and Ted's Trucks
Offline   Reply With Quote Quick reply to this message
Old 03-27-2015, 04:32 PM   #27 (permalink)
BadaBing
Diesel Apprentice
 
Join Date: May 2010
Location: Spring, Tx
Posts: 448
iTrader Score: 0 reviews

U-Joints.
__________________
LML CCSB 4X4
Offline   Reply With Quote Quick reply to this message
Old 03-27-2015, 06:13 PM   #28 (permalink)
grabowski
Whistle Pigs Are Cool
 
grabowski's Avatar
 
Join Date: Apr 2005
Location: The Syncro Ranch
Posts: 2,445
iTrader Score: 2 reviews

Old School Oil Burners (Old SOBs) Member

The Suburban Club Member

Quote:
Originally Posted by BadaBing View Post
U-Joints.
Quote:
Originally Posted by grabowski View Post
Front & rear drive shafts do not have loose u-joints, the Suburban does not have a 2 piece rear drive shaft.
.
__________________
The highest recommendations are in Bold below
________
1985 GMC 6.2 manual 4x4 3/4+ton 64,013 miles (5-1-19)
______________
The Blowby Queen '94 Chevy 'burb Silverado K2500 4L80E 4.10. Quadstar Tuning.
Midland Diesel Las Vegas Diesel rebuilt 5221 Blue Label IP with ULSD Upgrade & rebuilt Bosch injectors @ 2200psi. 235-85 on 16" PYO alloys. Bilstein HDs, Hellwig rear sway bar. Heath TM. Fluidampr. S&B oiled filter Intake, Provent 200 W/catchcan. Bosch Duraterm GP W/PT Solutions GP harness. WJ FTB. AC Delco Tstat & Red Line Water Wetter. hxtasy PMD #2 resistor on Heath Isolator 4. LS 1/2" oil cooler & lines. OPS Relay Mod & Leroys Hose. Diamond Eye exhaust. Heath 2.5" crossover. W/T Grille. VDO EGT & Vac/Boost gauge with copper line & Leroys Boost Bolt.


- 12-13-16 Out Of Commission @ 194,680k, 50 miles after Teds Mil Takeout Install. Bad noises in the motor.
- 12-29-16 #7 lifters and pushrods replaced and still sounds like a metal trash can half full of hammers rolling down a scree field.
- 03-01-17 @ 194,802 miles she's no longer mine.

12-28-2016: I no longer recommend Badger/kr_services and Ted's Trucks
Offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Diesel Place : Chevrolet and GMC Diesel Truck Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

PLEASE READ! You must check your email inbox for the confirmation link to complete registration. Please check your spam box if you do not see the email in your inbox.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:
Insurance
Please select your insurance company (Optional)

Log-in


Thread Tools

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
moaning on decel Twisted Tine Drivetrain - 2001 - 2010 6 04-07-2014 06:32 AM
LLY drones on decel. pj951 Duramax Second Generation: 2004.5-2005 (LLY) 0 08-29-2012 01:09 PM
Wanted! Carbon Metallic (Dark charcoal metallic) D-max! (ill consider black or white) HDdave Closed / Archived Marketplace Ads 4 03-30-2009 09:11 AM
Noise on decel Supa Dexta GM Gassers 3 12-31-2008 12:51 PM
Why did GM stop the Dark Gray Metallic/Carbon Metallic color style? Z71 Grizzly Exterior 31 01-30-2007 09:45 PM


All times are GMT -4. The time now is 07:55 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Shoutbox provided by vBShout v6.2.1 (Lite) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd. Runs best on HiVelocity Hosting.
© AutoGuide