T76 .81A/R to .96A/R turbine housing
I have looked around from time to time, looking for a larger turbine housing for my T76 atmospheric turbo. If I did find one they were really expensive or I couldn't be sure from the poor description that it would actually fit my turbo.
Now there are a bunch of .96A/R housing for P-trim T76 turbochargers on evilbay.
I wanted to go bigger than 1A/R but it will take the less than 1A/R housing if it will do what I want.
Problem is the T76 does most of the work. If I am riding along making say 10 pounds of boost the T76 is making 6psi feeding into the HE351VE, then the HE351VE is bumping that 6psi up to 10psi.
I would like the T76 to be a lazy oversized atmospheric turbo that builds 30 to 40% of the boost pressure. I also get the feeling the .81A/R housing is a bit of an unnecessary choke point.
I know most people don't want the turbo charger to be over sized and laggy but that is kind of what I am going for.
How much lazier would the larger .96A/R housing make the T76?
Even better, the guys selling the .96A/R offer a 1.15A/R housing, that should be more in line with what I am looking for.
I am going to buy one.
Alright I got the 1.15A/R turbine housing, wasn't cheap as I thought it would be.
Projected install date will be some time in august, if I don't pull the engine.
|All times are GMT -4. The time now is 12:26 PM.|
Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Shoutbox provided by vBShout v6.2.1 (Lite) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd. Runs best on HiVelocity Hosting.