whatever these are they don't look good - mounts?
While doing my oil change today, I noticed these. What are these?
They sure don't look good. Only 30k miles on truck -- surprised/disappointed these are so fried.
Two pics -- one on drivers side facing toward front of vehicle, one on passengers side facing toward front of vehicle.
I'm guessing the repair is beyond my mechanical skills and tools. So what am I looking at $ wise on this repair? And is there a better solution than whatever this crappy OEM material is made of?
2006 Chevy 2500HD Crew Cab 4x4 Duramax LBZ LT, Fire Engine Red
Purchased April 2013 with 25k miles; 62k miles as of Feb 2016 | DSP5 by Idaho Rob (extra mild tunes; running enhanced stock tune for EGR block) -- 4/1/14 | Edge CTS, EGT probe and Dash Pod -- 4/1/14 | Kennedy twins, wire harness and MEGA filter (soon) -- 3/XX/16 | MA pump upgrade kit -- installed 9/7/13; refilled w/ Transynd | Double drain, double pan drop and refill w/ Transynd on 8/17/13; double drain on 12/14/15 and refill w/ Transynd | Suncoast shallow pan filter lock -- installed 8/17/13 | Nicktane adapter -- installed 8/4/13 | Z71 jounce / bump stops -- installed 8/4/13 | Front wheel bearings replaced at 60k Jan 2016