Diesel Place : Chevrolet and GMC Diesel Truck Forums - View Single Post - clunk when making a sharp right turn
View Single Post
Old 04-04-2009, 10:40 PM   #8 (permalink)
ghitch75
Diesel Nut
 
ghitch75's Avatar
 
Join Date: Sep 2006
Location: Indiana B.F.E
Posts: 902

Quote:
Originally Posted by iamdave0887 View Post
interesting tookie.

With 178K on the truck i'll probably rebuild the front end. new ball joints, new bushings all over, new idler arm, etc etc. That may be my big summer project.

i just done the whole frontend on the burb 2 days ago(188k on mine)......bushings and ball joints sucked!!!....need to have it alined.....and boy it drives alot better....you couldn't look around without going into the other lane or off the road....it was bad!!!!

getting the bushings out....easiest way i found was to take a drill bit and drill the rubber out to loosen them up then a good swat with a hammer...

put on new EBC vented rotors and pads....
__________________
94 Suburban K2500 4x4 6.5 turbo auto...4" Diamond Eye Exhaust, rebuilt IP,new OPS,Heath HD LP,home made TM,Heath PMD cooler kit, Heath optical harness,Heath HP4....
93 4x4 k3500 cab & chassis 6.5 turbo 5 speed flat bed dump 3" downpipe,4" straight pipe, home made TM, Performance Induction, Boost Gauge

2006 2500 van 6.6 3" DP,MBRP 4" with muff,Homemade intake,Bully Dog G/T

#383 proud member of the DUALLY CLUB
"Brotherhood of Handshakers" Club #84

NRA Life Member
Offline   Reply With Quote