Diesel Place banner

Labonte W/M Nozzles vs HP

932 views 1 reply 2 participants last post by  bml2200 
#1 ·
Just looking to see what everone is useing for nozzle size as per HP. I'm using a M7 -M14 Right now with my PPE at 260- 300. I just ordered another M14 an M10.. I 'm still running some big EGT'S if I dont watch it. And at WFO its maxed out at 100%. maybe the tune is just to much:confuzeld.maybe a bigger Turbo is what I need :D . It doesnt seem to be a lot different with the meth on or off at WFO.. just at half and 3/4 for cooling. I have tried 50/50 -25/75. and now strait water. Maybe once I get the big nozzles it will bring it down..Any help would be cool :)
 
#2 ·
I run a M2 and two M10's. Without water meth I have 560rwhp. With 30/70 I have 600rwhp.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top