Diesel Place banner

Meth Injection pump issues

1K views 5 replies 4 participants last post by  Labonte MotorSp 
#1 ·
I have an AEM meth system on my truck. It worked good for about 3 months and then the wires on the brushes on the pump motor burnt off. I cant tell if the pump was leaking into the motor and it shorted out or what. It is a shurflow pump. Has anyone had this happen to them? Or know a part number for new motor brushes?

Thanks
Digger
 
#2 ·
My Snow pump stopped working after bout 3 months too. Dont know what was wrong with it, just sent it back and they sent me another. Id call AEM and see if they`ll replace yours.
 
#4 ·
#5 ·
I know when I talked with Snow about upgrading to a larger pump they said not to due to their controller being setup for a smalller pump. Kinda of a bummer cause I was wanting to upgrade with Labonte`s 250 pump. But I dont know how AEM controllers are setup might wanna ask.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top