Diesel Place : Chevrolet and GMC Diesel Truck Forums

Diesel Place : Chevrolet and GMC Diesel Truck Forums (https://www.dieselplace.com/forum/)
-   Second Generation Duramax Electronics/Tuners (https://www.dieselplace.com/forum/3-power-performance-tuning/78-second-generation-duramax-electronics-tuners/)
-   -   LLY: No Start, No crank, No comm. (https://www.dieselplace.com/forum/3-power-performance-tuning/78-second-generation-duramax-electronics-tuners/970964-no-start-no-crank-no-comm.html)

RyanG58 11-07-2018 08:27 PM

No Start, No crank, No comm.
 
Hello all, kind of in a bit of a $#!T position and looking for advice, but I recently bought a BullyDog and tried to do the install. I unplugged all fuses and all aftermarket things as they told me in the instructions, and also made sure to load the program and update BullyDog. After all that I started the load process in the truck and it got most of the way through until it got to the writing tune to engine, then it would stop and throw code 358, which is basically interference on the data link or no communication. I tried a couple more times and still no luck. I unplugged the tuner and put all my fuses back in and the truck started back up fine, no issues. So, I drove the truck to the place that sold me the tuner, and asked for some help and we tried again to load the tuner, still no luck. So we tried to re-flash the PCM to stock in case there was already some different tune in there. When we tried to flash it, it said there was a couple updates, but when we tried to flash it, it wouldn't take the flash.. Being out of time, we took the scanner off and decided to deal with it another day, except now the truck wouldn't start.. I have no glow plug light, and the only gauge that works is the battery gauge. The shop did a bit of diagnosing as the truck was dead there and they said the PCM is fried and isn't talking anymore.. I guess my question is, are there any other tests or things I can check before spending 500+ on a new PCM when it may not be the issue?

OkDually 11-07-2018 08:55 PM

Welcome to DieselPlace

Please take a moment to fill out your signature with vehicle info ( Year, Make, and Model ) and list any known mods.
When this is complete it will appear with each post you create and will help the other members give you the best advice towards your questions and issues.

:thumb:

oldschoolbowtie 11-26-2018 12:38 PM

welcome to DP

sorry about your situation

short answer is yes, you can take the ecm removed from truck and a competent tuner can hook up and see if it is functioning.

I have a buddy that test them for a local salvage yard so they can sell for top dollar and they pay him in ecms….

I would use a different shop to get my second opinion

good luck

sfcjones 12-22-2018 05:41 AM

SoCal Diesel - #1 in Duramax Diesel Performance

He fixed mine on my 04 GMC

Ron Nielson 12-22-2018 10:33 PM

If your truck is stock, I would ask the local dealer for help in flashing the ECM. Someitmes, their tools work when other aftermarket tools will not.


All times are GMT -4. The time now is 11:01 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
SEO by vBSEO 3.6.1
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Shoutbox provided by vBShout v6.2.1 (Lite) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd. Runs best on HiVelocity Hosting.
© AutoGuide