Hey, first post.

I own a 6.5L naturaly aspirated completly stock 94 1500 series Silverado.

I was wondering what would be involved in converting from non-turbo to a turbo
setup.

Any input would be greatly appriciated.

manifolds (intake and passenger side exhaust), turbo, chip,....

p have about 85-90 percent of the things you'd need to make it a turbo.

Intake manifold, exaust manifold, turbo, oil input line, and the downpipe. I do not have a crossover that will work with you, nor do I have a oil return line. Everything else is there cept whatever you need to do to make more fuel come. I put this on my 6.2, but now I have a 93 6.5TD. in my 85 blazer.

PM me if your interested.

Guipo