|
Durapower 08-07-2006, 04:03 PM i have an edge programmer,5" exhaust afe stageII. had it on extreme when tranny made a noise and started redlineing at 3000 rmp and only going 15 mph. got towed home and now wont go anywhere in any gear. disconnected the prommer , took neg cables off to reset and get light off. work for about 4 feet than came back on. the code showing up is PO700 RickDLance 08-07-2006, 04:12 PM You'll need a code reader that reads TCM codes also. A tech2 would be best. PM MikeL for more info. Durapower 08-08-2006, 08:23 PM I got these 2 codes P0731 P0732 Does anybody know what these mean? RickDLance 08-08-2006, 08:39 PM Run them thru here; http://www.dieselplace.com/forum/dtc.php Durapower 08-08-2006, 09:18 PM the codes are saying incorrect gear ratios. Does anybody know what causes that? Thanks for the help it has been useful and appreciated. | ||