|
ccchevyz 07-03-2006, 05:23 PM im installing my gauges and i already got my pyrometer installed and it works fine....im nervous about drilling the intake with it on there, and i want to take it off...looks like there are a few gaskets i may have to replace, and the buts arent that easy to get to...anyone ever done this on an LBZ? all i want to do is take it off so i can drill/tap for the boost fitting. Any help is appreciated. Brent SleeperTRK 07-03-2006, 05:34 PM you can take it off if you want but that will be a PITA, just drill it on the truck w/ the engine running. There is a thread about this process, will someone help me by posting it? thanks Todd ccchevyz 07-04-2006, 01:28 AM you can take it off if you want but that will be a PITA, just drill it on the truck w/ the engine running. There is a thread about this process, will someone help me by posting it? thanks Todd i believe u are talking about drilling the EXHAUST manifold on the truck while running...i already did that, im just worried about drilling the INTAKE manifold, and i would like to take it off to do so. I contacted Superdiesel and they have a SD manifold for the LBZ so i think i may buy that, but i still need some help and advise getting that stock one off SleeperTRK 07-04-2006, 02:08 AM oh lol sorry, I jumped ahead. I have never installed one my self just a pyro TTT for you, good luck ccchevyz 07-04-2006, 03:16 AM oh lol sorry, I jumped ahead. I have never installed one my self just a pyro TTT for you, good luck haha no problem man thanks ccchevyz 07-07-2006, 01:46 AM hmmm guess no one has done this? just ordered the LBZ SD manifold today after work...i get paid tomorrow so i had some incentive to go ahead and order it ):h Bodysurfer 07-07-2006, 01:51 AM I have a LB7 but did the SD intake also: http://www.dieselplace.com/forum/garageimage.php?do=full&p=11862 ccchevyz 07-07-2006, 10:29 AM where exactly will mine be installed? what do i take off to replace? :help: bartman 07-07-2006, 05:29 PM Your's will go right after the turbo and replace the black factory "boot" ccchevyz 07-08-2006, 02:37 AM Your's will go right after the turbo and replace the black factory "boot" thanks buddy! banshee1973 07-08-2006, 02:53 AM The way I did mine was at the intake I took of the Intercoler tube and put a shop vack on the intake so that when you are drilling all of the shavings will go into the shop vac here is the link of the picture at were I installed mine. ccchevyz 07-08-2006, 12:44 PM mine just seems hard to get to...instead of the the the intake coming from the side, it goes down towards the radiator, then turns into that plastic tubing...ill take a pic later and post it, and if you guys could tell me what i take off and replace the SD manifold with that would be f'n awesome! | ||