dustinw
06-29-2006, 04:10 PM
Anyone know how much fuel is consumed by the LBZ @ idle? Say in gallons per hour?
|
lakingslayer 06-29-2006, 05:18 PM It's probably close to if not the same as the previous models which IIRC .5-.75 gph Basshopper 09-20-2006, 12:42 AM It's probably close to if not the same as the previous models which IIRC .5-.75 gph Can you tell me what the GPH would be at hwy speeds and what PSI with out lift pump. I am trying to figure out the flow for the fuel to size some 3 way valves. Thanks ktmrfs 09-20-2006, 01:38 AM My lly reads about 0.2 gph in park warmed up no A/C. add about 0.1gph for A/C and another 0.1gph if the engine is in drive rather than park. smokinjoez 09-20-2006, 02:50 PM Just curious if anyone knows what the 6.0 liter gas engine would do for gph in idle? Wooter 09-20-2006, 03:26 PM My DIC reads 0.0 if i reset it while idiling :rolleyes: dozerboy 09-20-2006, 08:49 PM Try putting it in gear and taking your foot off the brake that will help your mileage.;) ):h TubeKing 09-20-2006, 09:54 PM My DIC said "oaklahoma city oklahoma" a few years ago, now it just says "OK" A new code maybe? ninthmike 09-21-2006, 04:07 AM hey im new here looking to find out why my LBZ wont start . check eng. light came on then did not start code said 4063 just befor it happend. I pumped the primer on the filter then it started that worked only twice now it will not start 8000 miles thanks mike 1lbz4me 09-21-2006, 02:47 PM Anyone know how much fuel is consumed by the LBZ @ idle? Say in gallons per hour? I have an 06 LLY with a scan gauge 2 and it reads .4 GPM at idle (no load), in gear .6-.7 GPM and about .8 GPM in gear with A/C working (not just on). In the morning it will be about 1.0 GPM out of gear at idle until it warms up. StevoDaDevo 09-21-2006, 03:13 PM hey im new here looking to find out why my LBZ wont start . check eng. light came on then did not start code said 4063 just befor it happend. I pumped the primer on the filter then it started that worked only twice now it will not start 8000 miles thanks mike You should probably start a new thread for this. Ruben Z 09-21-2006, 04:51 PM Not sure, but when I had my 6.0 gasser I could see the needled move just looking at it. It has to be the worst mileage vehicle I've ever been in. I remember my old 85 truck getting better mpg. Just curious if anyone knows what the 6.0 liter gas engine would do for gph in idle? Riccas 09-21-2006, 06:47 PM My LBZ consumes .35 gph i did the math one day to findure it out. Ran a little less than 3 hours on 1 gallon. pscarollo 09-21-2006, 07:00 PM Don't mean to hijack the thread but why you want to idle the engine for any longer than turbo cool down period prior to shutdown...usually no longer than 3 minutes or so? dozerboy 09-21-2006, 07:34 PM Because they don't want to shut it off.:duh: :D Like if your sleeping in your truck or if your out in BFE its colder than a witches *** and don't want to have to worry about it starting. pscarollo 09-22-2006, 01:22 PM Because they don't want to shut it off.:duh: :D Like if your sleeping in your truck or if your out in BFE its colder than a witches *** and don't want to have to worry about it starting. I see. Don't have that problem in California but of course we have other problems that would take more space than the moderators would allow...! dozerboy 09-22-2006, 07:55 PM Ain't that the truth. | ||