I torsion lifted my 06 2500HD 1 1/2" yesterday.Took it in for an alignment today.As every one states it`s way out.Even at max adjustment for Camber there is not enough to quite get it back to specs.I`ll watch the tire ware and see how it works out.

UM, your camber was fine in the 'before' reading and still fine in the after, but higher than I like (I usually set camber close to 0 +/- .2 as possible). According to the before reading I would have left it alone and set toe. Don't worry about caster bring in specs, too much caster will make it steer funny on the freeway.
IMHO it should not have been touched, except toe (according to that picture).