first off I'd like to say that this is a very informative and useful place. I have been reading up on the h2 wheel threads and had a question. I was wondering what the size of the mounting hole is on the h2 wheel. I am considering using them on my K5. ( I know - not an HD - but it does have 3/4 running gear. Is the hole too big for an 8 lug 10 bolt? I know people are using them on d60's, but if it will work this is a hell of an opportunity to get a set of wheels and tires for a good $. thanks for your time.

This should have the information you are looking for.


http://dieselplace.com/forum/forum_posts.asp?TID=8299&PN=1

Max - thats a start, thanks. But this is a '85 sfa blazer. I think it will, but just want to be sure.

Won't fit unless u have the center bore milled or turned on a lathe.


The new ones are 3/16-1/4" smaller than the old style.


The old wheels will work on the newer trucks.