|
farmerdan9000 06-15-2006, 01:35 AM I've been debating this for a while now, but I think i'm gonna go ahead and order in the next few days and get it over with. I think I made my mind up on the SCIII, but just wondering what else I should do so I don't have to second guess myself when it's over with. I'll probably but the brace on too, but what about a deep pan and anything else?? Any input would be greatly appreciated, thanks in advance. _nar_ 06-15-2006, 01:57 AM Sounds like the cooler Mike L sells is also good, especially towing since a built trans runs hotter than stock. I plan to get one when I do mine... Southern Bred 06-16-2006, 05:41 AM All the extras can be bolted on without dropping the tranny. You can add pans, braces, coolers later if you need to. Might cost a little for fluid if you can't drain into a clean container. Good Luck mad 06-16-2006, 07:25 AM All the extras can be bolted on without dropping the tranny. You can add pans, braces, coolers later if you need to. Might cost a little for fluid if you can't drain into a clean container. Good Luck Which is why I'd do the deep pan now, during the rebuild. :) | ||