After taking the Fabtech pitman arm off and going back to stock, the SD centerlink now hits the swaybar.

I tried getting a longer bolt for the swaybar to be farther from the lower A-arm. It is an odd size.

Anyone have this problem and find a solution?

Thanks, Jason.

ok, so is there a lift kit out that has the hardware that increases the distance between where the swaybar and the lower control arm come together?

I have this problem when turning sharp, but only on one side.

Do you have a lift kit? Mine clears fine

-Rob-

no lift kit, just the green keys on the lowest setting, it hits on the right side.