was wondering if eny one has 18x10 wheels on non lifted d max would loke to know off set and back spacing that you guys may have or if you know what backspacing would work or if i should just bag the idea of 18x10s on a non lifted truck

I've got 18x9's with a +12 offset, 5.4" backspace. More pictures in my garage. There are a few guys on here running 18x9.5 eagle 114's w/ a 6" backspace. I know there's someone out there who posted recently that has 18x10's and they said they had to do alot of trimming, but they had a negative offset.

Check out this thread it has pictures of my truck not lifted.:grd: http://dieselplace.com/forum/showthread.php?t=67371

BobD,
How much was the wheel and tire package?

Gee I've slept a few times sence then but if I recall I think it was around $1,600 for every thing and I got 5 wheels so that when these get wore out I can put 1 on for a spare or if one gets damaged. Although I have never broke or bent a wheel "knock on wood". I do know that the truck rides a lot smoother and more grip they dont slip like the stockers"pizza cutters" hope this helps.:grd:

Exactly 2K. Not bad considering that's mounted w/lugnuts, trimming, zip tying and slight tbar adjust on drivers side. I was already trimmed and raised for 285/75/16's before. Personally I'm hoping someone will make a 305/18, these are a little fat for me. I just couldn't get over the smaller sidewall on a 305/55/20 at the time.
BobD,
How much was the wheel and tire package?

I've got 18x9. BUT, I did crank up the torsion bars. Check my garage.

I've got 18x9. BUT, I did crank up the torsion bars. Check my garage.

Nice wheels, looks like they hardly stick out at all.

do you guys with 18x9.5 know what back spacing or off set u have

I think those are Eagle 114's, 6" backspace. Very popular 18. Do a search lots of posts w/pictures out there. They might be Welds, similar design and bs.

These are 18x9 with 35x12.50's BFG MT/KM's

Don't mind the smoke :D

Yes 6" I am pretty shure the ones that I have are the eagle 114 I get a lot of:ro) good luck!

Another pic..

EDIT.. Wrong pic ;) couldn't really see the rims there..

See my garage for 18x9.5 Diamos. Junk Kuhmo tires are off my old gasser. Just burning them off. Only bad thing about 18s on a non-lifted truck is the lack of tire options.

Only bad thing about 18s on a non-lifted truck is the lack of tire options.

Which is exactly why I switched back to 16"s. Sure wish the tire companies would get a clue. I can't tell you how many times I emailed BFGoodrich asking when they were going to release the 285/65R18 in the mud terrains... :mad: