wondering if these will fit good on a stock 2500hd, would a 285/75/16 tire be a good choice and would these wheels stick out a rediculous amount?

thanks

I have these on my truck 16x10 285 with green keys turnes up they still rub on the inner fender well drivers side and catch a little on the front bumper passenger side. But i realy like the look of this :cool2:

16x10's with 365/65-16s. Some trimming. :D

The biggest thing is they stick out a fair bit.

They do not fit real well, but you can make them fit. I just put mine on last week. I cranked the torsion bars all the way up (10 turns), trimmed 2" off the lower valence, zip tied the inner plastic fender wells out of the way, and ground part of the bumper off on the inside. They stick out about 2" past the fender flares. I will put picks up here shortly. They look awesome though.

I just tried to fit a set of 16.5x10 w/4.5 back spacing w/33x12.5's and they didn't even clear the lower valance.

damn i really want these 16x10 weld wheels :(

With some trimming.....

http://dieselplace.com/forum/attachment.php?attachmentid=6390&d=1121307996


http://dieselplace.com/forum/attachment.php?attachmentid=17&d=1101004942

They will require trimming and stick out quite a bit... But it's doable...

With some trimming.....

http://dieselplace.com/forum/attachment.php?attachmentid=6390&d=1121307996


http://dieselplace.com/forum/attachment.php?attachmentid=17&d=1101004942

what size tires are you running?

Nitto Terra Grapplers 365/65-16s on 16x10 Welds

I just put 16"x10"s with 265/75R16's on my truck 2 weeks ago. With the bars cranked a little, and a small trim on the lower valance, they clear fine. While four wheeling this last weekend, I did get them to barely rub in some off-camber spots when the wheels were turned just right. I would think that 285's would either need more extensive trimming, green keys, or both. The 16"x10" Welds should bolt right on (provided they have the right bolt pattern).

I run them without much trouble. They will rub on my mud flaps if I turn the tire all the way in reverse. The awesome look is well worth it though.;)