:help: I wanted to make the lights dim with the cluster, So I move the wire that was in a fuse and tapped into the brown and white wire behind the dimmer. Now my EGT gauge is not working what do I need to do now? The lights in my gauges was on all the time. My Boost is still working? :help:

Turned my lights on and the EGT works. What do I need to do to be able to use the dimmer for the gauge light?

IIRC, there should be 2 power wires. 1 for the gauge and 1 for the light. I would say who ever installed yours tied the 2 together for ease of installation. You will need to separate them and run only the light side to your new power location. Put the gauge itself back on the old power source. Hope this helps!:)

I agree with above. Sounds like you DO have the correct wire for the dimmer though.

Thanks I will have to try that.