|
Xsta Z 28 04-26-2004, 05:51 PM Do 04 HD's come prewired to provide power to a trailer for things like interior lights, 12v power outlets, and such? I have the trailer wiring package, but the lights inside the trailer do not work? KTDURAMAX 04-26-2004, 05:56 PM I have an '04 also. My '02 didn't do it, didn't care to much to find out why. I'm interested this time. jholly 04-26-2004, 06:30 PM Do 04 HD's come prewired to provide power to a trailer for things like interior lights, 12v power outlets, and such? I have the trailer wiring package, but the lights inside the trailer do not work? The trailer pulling option (Z82? Z85?) includes a 7 pin connector. Besides tail, turn and backup lights is a ground and B+ pin. Also a brake pin. Is this what your looking for? Jim KTDURAMAX 04-26-2004, 07:12 PM Nope, The B+ has nothing....running engine or not. Max Power 04-26-2004, 07:17 PM You need to put a fuse in place in the underhood fuse box. There will be a shunt in place now. DavesDmax 04-26-2004, 08:40 PM Yep, What Max Power said. I found the fuse taped inside the pigtail bundle that came with the truck. If you don't have the pigtail, the fuse is a 40 amp J-Case, about $5.00 from NAPA or equiv. KTDURAMAX 04-26-2004, 11:28 PM I will look there again... did not see a spot. I need to take off my glasses http://www.dieselplace.com/forum/smileys/Cool.gif Xsta Z 28 04-27-2004, 04:30 PM I saw the fuse taped to the harness that came with the truck. I thought it was installed into the harness, and yes it is a 40 amp breaker. . . . Well duh - THANKS! I'll check that out tonight. KTDURAMAX 04-27-2004, 04:49 PM Found it, there was a asmembly sticker covering the whole row....It's the 1st fuse location looking at it from the side fender. THANKS!!!!!!!!!!!!!! AkDually61 04-28-2004, 08:34 AM is the fuse in the 5'er harness ? or in the trailer brake harness? I have an '02 that has all the wiring but I didnt see a fuse???? thanx, Billy Zeeb 04-28-2004, 10:05 AM There was a brake controller harness in the glove box on my truck. It was taped together and the fuse was in the middle of that. Xsta Z 28 04-28-2004, 01:40 PM There was a brake controller harness in the glove box on my truck. It was taped together and the fuse was in the middle of that. Yep - and the very first spot in the underhood fuse panel was a red cover stamped with "B+" Now need to see if it works! Amazing what you learn if you read all the instructions . . . http://www.dieselplace.com/forum/smileys/Embarrased.gif Kartattack 04-28-2004, 02:13 PM <UL> <LI></LI> <LI></LI> <LI></LI> <LI>The red circle is around the location of the blank and where the 40 amp trailer fuse needs to go.http://www.dieselplace.com/forum/uploads/663_Relay_Pos1.jpg </LI>[/list]Edited by: Kartattack | ||